Home100PCS/98PCS Paintless Dent Repair Tool Dent Removal Tool Kit Professional Hail Dent Lifter Bridge Puller T Puller Hot Glue Tap Down Kits US/EU/UK/Car Charger Plug100PCS/98PCS Paintless Dent Repair Tool Dent Removal Tool Kit Professional Hail Dent Lifter Bridge Puller T Puller Hot Glue Tap Down Kits US/EU/UK/Car Charger Plug
100PCS/98PCS Paintless Dent Repair Tool Dent Removal Tool Kit Professional Hail Dent Lifter Bridge Puller T Puller Hot Glue Tap Down Kits US/EU/UK/Car Charger Plug
Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It?s easy to pops a dent with the detailed repair steps described in the manual. Also, you can contact us if there is any question, we are always on
Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.
How to use the pdr tools £¿
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.